rebuilt the carbs, quick question on tuning

[PAULYBOY]

To chime in here, I assume if you have to adjust the float level, you'd do it by bending the arm the float attaches to?

[beachbum3478]

im pretty sure theres just a little tab that you bend, that rests on the needle.

[TheCafeKid]

To chime in here, I assume if you have to adjust the float level, you'd do it by bending the arm the float attaches to?

NO!!! Dont do that...you'll kick yourself later. You bend the tang that rests on the float needle to adjust BOTH sides of the float up and down equally. Now if some moron has done what you just said, you'll have to fix it. Its important that all of the float levels are the same. As ive said, be meticulous...you'll thank yourself for it later. Having to pull those SOBs off and double and tripple check can be a PITA...do it BEFORE you put them back in...I know this, as i would bet im the fastest carb puller this side of the Mississippi. hehehehe