Thanks,
Announcement
Collapse
No announcement yet.
exhaust pipe dia 81 1000g
Collapse
X
-
spindle
exhaust pipe dia 81 1000g
A guy here at work just gave me a pair of new Harley mufflers. Looks like 1 3/4 id and 1 7/8 od. Does anyone know if these will fit into or over my stock exhaust after the cross over? My stock mufflers are fairly dinged up and the insides are rattling loud enough to hear at stop lights.
Thanks,Tags: None
-
I just measured the pipes on my wife's 850L. At the weld at the beginning of the mufler, it measures right between 1 3/4 and 1 7/8. Could be some crud on the back side of the pipe affecting the measurement, and the 1000 pipes might be just a touch larger, so I would think the 1 7/8 would fit.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
spindle
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13964
- London, UK to Redondo Beach, California
At the weld my 1000g pipes are 41.5mm.
Dan1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
Comment