I notice something

[KRISTI'SGS550]

http://webservices.motorsportdealers.com/parts/partImages/SUZ/2/02/70/0012.Gif

in this illustration the intake boots have what they call a ring and the clamp. On my bike all I have are the clamps. Do I need the rings as well? What would happen if I didn't have the rings? Also when ordering the boots, there are two different types. Are they different sizes or something? Any answers are appreciated thanks!

Cory

p.s. someone will have to teach me how to post pics on here. It is different than my other forums.

[robertbarr]

We're pretty sure you own a 550, but from there, we don't have E.S.P. So... what year?

[psyguy]

have a look here for your particular model, and yes, do make sure all the parts on the fiche are on your bike as well

http://www.bikebandit.com/suzuki-motorcycle-parts/oem-parts

also, it helps if you put your bike model and year in your signature

[KRISTI'SGS550]

I have a 1981 GS550

The micro-fische is the correct one for my bike. I was just wondering the importance of the part, and why I wouldn't have it on mine?

[chef1366]

You need the rings to keep and seal the airbox boots in the airbox. I always used the rings until I ditched the airbox.

[Suzuki_Don]

Cory you need both parts for the boots. If you look at the part numbers accompanying the illustration you will see that you require 2 of each part. That equals 4 in total. Which is what you need for a four cylinder bike. Cheers.

[psyguy]

Also when ordering the boots, there are two different types. Are they different sizes or something?

i think you'll find that there is a left and a right boot

[KRISTI'SGS550]

When I took my airbox off I discovered I had one of four rings. This could have accompanied my vacuum/air flow/fuel problems?

Cory