.png "Powered by vBulletin")
got a gs110g that needs a starter clutch. I have several gs750 parts bikes. do they have the same starter clch?
if no where to buy replacement?
thx. mark in mn
if no where to buy replacement?
thx. mark in mn
-
-
What years?
They should be the same.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
-
Not exactly what you're looking for, but ive found that the starters, starter clutch and what not are the same from the 8v models and 16v models of 750s. Also the 1000 and 850 are the same, so i would chance to guess by that logic that they are pretty much the same across the line. Dunno if the "G" in your bike would factor into it at all however.Comment
-
bike is an gs1100g (8 valve head). donor bike would be 77-80 8 valve head gs750. sounds like starter clutch wuld be the same. now that I have the tools to pull the flywheel this is no big deal. thx for help everyone.Comment
-
I dnknow but
There are differences between by 1981 GS750EX 16V and 1983 GS1100ED 16V. For my bikes, the starters might look the same but there is a higher power rating on the 1100 (check for marking). The starter clutches are much larger on the 1100 as well. The only things that seem to cross reference are the barrales,springs and the little push rods thingys.
PosplayrComment
Comment