Announcement

Collapse
No announcement yet.

Breather hose question.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Breather hose question.

    Hey all,
    81 gs850gl.
    I have a question regarding the breather hose that goes from the valve cover to the airbox. I removed the airbox and replaced it with 4 pods. My question is, where do I put the breather hose that used to attach to the airbox? I'm getting some smoke out of the breather hose. Is that normal?
    Thanks for any info.

    #2
    it is normal to get some smoke, at least for me. K&N sells a crankcase breather filter and you should get one of sorts as it prevents dirt and debris from contaminating the oil.

    Comment


      #3
      I got a longer hose and just run it down in the area in front of the battery box and behind the engine on my 1100.

      I see the crankcase breather filters on ebay for cheap all the time but don't use one my self.

      Comment


        #4
        I purchased a breather off of ebay. Thanks for the responses.

        Comment


          #5
          I Went to Napa and got a 7/16 piece of hose with a 90 degree molded end,trimmed to correct length,then added a nice little chrome filter to match the k&n's from Advance auto in the tuner car section.Made a bracket to attach to valve cover bolt,where it now sits just above right knee, looks pretty cool to me anyway . And yes I occasionally get a little whisp of white smoke which I think is just a little condensation? evaporating out of crankcase. Good luck !!:-D

          Comment


            #6
            Originally posted by isleoman View Post
            I got a longer hose and just run it down in the area in front of the battery box and behind the engine on my 1100.

            I see the crankcase breather filters on ebay for cheap all the time but don't use one my self.
            Doesn't that risk spitting oil out in the path of the rear tyre?

            Dan
            1980 GS1000G - Sold
            1978 GS1000E - Finished!
            1980 GS550E - Fixed & given to a friend
            1983 GS750ES Special - Sold
            2009 KLR 650 - Sold - gone to TX!
            1982 GS1100G - Rebuilt and finished. - Sold
            2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

            www.parasiticsanalytics.com

            TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

            Comment


              #7
              Originally posted by salty_monk View Post
              Doesn't that risk spitting oil out in the path of the rear tyre?
              There should only be the occasional wisp of vapour coming from the hose.
              If you do have oil spitting out the tube, getting it on the tyre will be the least of your immediate concerns. :shock:

              Many years ago, before the Positive Crankcase Ventilation (PCV) system was implemented, cars and trucks had a tube attached to the valve cover or oil filler cap, that then was routed back and down, so the vacuum caused by the moving vehicle would extract the vapours from the crankcase. The tree huggers decided that was not very friendly to the environment, so the PCV system was developed. A couple of things in their favour, though, were that the breather tube was not in line with either of the rear tyres, and they had the stability of more than two tyres.


              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

              Comment


                #8
                I use a K&N and have it bolted down where the airbox was.
                1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
                1985 GS1150ES stock with 85 Red E bodywork.

                Comment

                Working...
                X