What Is Height And Width Of Gs750 Motor??

[mycb400f]

Will someone just measure the bloody motor and tell me??? :twisted: ](*,)

[justin caise]

Did some of my own stuff yesterday, by the time I got to taking measurements I was toast.
I'll check it when I get home from work tonight at 7-ish.
Reeeeaallly sick still, but hafta work.

(I haven't felt this bad since I fell off my dinosaur. HAHAAAAAA. BWaahaaa. Get it? "My dinosaur" the 79 Brontosaurus, haha....
C'mon, dYa get it? Crashed it last summer? Get it? ... GS1000... Dinosaur...
No?...)

[mycb400f]

Nope.....don't gettit..... :???:

But if you can get some measurements....that would be great....have you got the airbox?? If so, can you measure the motor with that on as well, 'cos that's probably the way I'll go....

Thanks
Nick

[justin caise]

All i gots for now. motor is kinda buried.
More later if i live.
gak

btw http://oldskoolsuzuki.info/cgi-bin/Y...ct=discussions

[Suzuki_Don]

All i gots for now. motor is kinda buried.
More later if i live.
gak

btw http://oldskoolsuzuki.info/cgi-bin/Y...ct=discussions

Are these the dimensions of the 8 valve 1000 motor.

[mycb400f]

OK...thanks guys....but what is the height of the motor??

As it is, it seems the motor will definitely not fit my frame, but if the height is good, I may be able to modify it....

Thanks
Nick

[justin caise]

Oh, sorry. this is for the 1980 16 valve TSCC.
And I neglected to check the height.

[justin caise]

Height of motor is 21" to the top crest of the crankcase vent ontop of the valve cover as it sits flat on it's pan.

Sorry no millimeters allowed in my garage. :-D

Sure would like to know what your trying to stuff it into...

[mycb400f]

Thanks for that Justin,

the motor is w...a.....y... to big for the frame

so I reckon I'll give this idea the heave ho...

I'm trying to stuff the BIGGEST possible motor into the SMALLEST possible frame I can find....I think going for 750 and 1000 motors was a bit too ambitious....I just missed out on a GSX400FW motor on ebay...and I went and measured it and I reckon I can squeeze it in the frame with a bit of modification...

The standard motor that my frame is built for produces 32BHP and the GSX400 produces 58BHP....so I reckon if I can get my hands on another motor and squeeze it in there, I will have a bit of a rocket on my hands...everyone will think I have a 'small' bike....but then they'll be surprised when I blow 'em all away at the traffic lights.....still not tellin' ya what frame though!!! It's not exotic ...it's just what I have in the back of the shed......

Nick