Thanks to all!
Announcement
Collapse
No announcement yet.
X-Pipes?
Collapse
X
-
Lord_Zarkon
X-Pipes?
Has anyone on the Forum owned, or known anyone who has owned these X-pipes made by Monte Campbell in CA? I am curious to know if they work as he claims or not.
Thanks to all!Tags: None
-
If it seems too good to be true then...........1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
hp1000s
Claims are just claims until proven....I don't think this protracted discussion ever revealed anyone that actually had put this pipe on their bike. Someone might, however, do it just for the "look" of it as opposed to any performance-gain claims....
Comment
-
I have a friend who has one of the infamous X-Pipes on his '81 Yamaha XS-11. The bike is jetted correctly for the pipes, and I've ridden it quite a bit.
It's louder than a factory exhaust, but no louder than a typical 4 into 1 from Kerker or V&H. As for power, the bike runs strongly, but no more so than my GS1100G, probably about the same.
I doubt if it is significantly better or worse than any other aftermarket exhaust. The outrageous claims on the website would turn me off to purchasing it more than anything else.GS450E GS650E GS700ES GS1000E GS1000G GS1100G GS1100E
KZ550A KZ700A GPZ750
CB400T CB900F
XJ750R
Comment
Comment