Announcement

Collapse
No announcement yet.

Modern Brake Calipers on Stock 750 Forks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Modern Brake Calipers on Stock 750 Forks

    I would like to know if anyone has changed there front calipers on there 1977-1979 dual disc front ends for 750, 850, 1000 or higher bikes ? If so please advise the who, what, when, and where. I would love to rebuild my stock calipers but I cannot find anyone who has the parts anywhere.

    DO NOT TELL ME TO GO TO BIKE BANDIT OR CRC ONLINE OR JC WHITNEY OR DENNIS KIRK !! I have already looked.

    There is nothing in Dealer aftermarket books like Motorcycle Stuff, Parts unlimited either.

    Your help will be greatly appreciated.

    Louie

    #2
    Louie,

    Which parts are you looking for? Just the standard dust boots / piston seals, or are you getting more in depth and also looking for caliper piston and other replacement hardware?

    I re-did mine a few weeks ago, and had no problem getting the parts I needed for mine.....but I only replaced the rubber parts.
    Frosty (falsely accused of "Thread-Hijacking"!)
    "Make it idiot proof and someone will make a better idiot."

    Owner of:
    1982 GS1100E
    1995 Triumph Daytona 1200

    Comment


      #3
      i tried to mount calpiers from a 97 kat 600 but they hit the rim, i did use the master cylinder, works awsome!

      Comment


        #4
        Sure you can find just about anything for 1980 bikes and up but its slim pickings for 1977-1979 folks. Still waiting on good answer to this. I know someone is out there

        Comment


          #5
          any caliper with square brake pads wont bolt up to our 77-79 750`s with round pads, bolt spacing is differnt.....did you try the dealer? i had no trouble finding caliper seals.

          Comment


            #6
            Found everything with local fella from great mills cycles here in Lexington Park Maryland. Love you folks !!

            Comment


              #7
              I know that Suzuki still makes and distributes parts for these bikes as they are still available in Australia, I am continually amazed at how few of our Us members actually bother with there local dealer, Why?
              Dink

              Comment


                #8
                Originally posted by Dink
                I know that Suzuki still makes and distributes parts for these bikes as they are still available in Australia, I am continually amazed at how few of our Us members actually bother with there local dealer, Why?
                Dink
                Same in Mother England, Dink.

                I could get these parts from at least 3 specialist dealers, overnight delivery.

                Try These:

                Welcome to Robinsons Foundry, your one-stop for all your motorcycling needs. Full range of new & used motorcycles for sale in Kent + Servicing, MOTs, Suzuki Parts & Accessories.






                All the best, fellas.

                Comment


                  #9
                  Originally posted by ageekapc
                  Sure you can find just about anything for 1980 bikes and up but its slim pickings for 1977-1979 folks. Still waiting on good answer to this. I know someone is out there
                  When checking Bike Bandit for your parts do not just check your bike and year. Many part are interchangable and while they might not have a widget for a 79 Suki 750 they may have one for an 81 and the part number may be the same. Always cross check any part number for the same number from a newer bike. Sometimes you get lucky and sometimes you dont.



                  Someone asked why some folks dont go to the dealers to get parts. 2 reasons. Some dealers dont bother with carying parts that old and dont want to bother to order them cause they dont make any money on them and...2 Most times they still cost too darned much money. Suzuki (and alot of other companies as well) have more than made their money back on anything they produced back in the 70's and 80s and yet they still try to make big bucks off of it now.

                  Comment


                    #10
                    better calipers for early gs

                    don't quote me but i understand kawasaki gpz750 calipers go straight on and are much better

                    Comment

                    Working...
                    X