Announcement

Collapse
No announcement yet.

opinions on 'sort of' plug chop pic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by Colin Green View Post
    I'll wait for a response from Nikau. Bike bandit wanted $64 US for 2 gaskets and 4 jets (OK) but wanted $79US for shipping (not OK)
    yeah, i know
    that's where www.z1enterprises.com come in
    you do need to e-mail them and ask if they can get all that (and they most likely can) and the shipping rate is much more realistic, but it does take a bit longer (like 2-3 wks) if they dont have all the parts in stock and due to the time eaten by all the correspondence

    also, from experience, you can talk to b-bandit and ask them to adjust the shipping to whats realistic for those few parts that they can stick in an envelope (website gives you a generic minimum shipping based on a small box -and thats not always the case)
    Last edited by psyguy; 03-19-2008, 12:21 AM.
    GS850GT

    Comment


      #32
      Originally posted by psyguy View Post
      i would first figure out what can be swapped "internally" and what other sizes you need
      "steve" has a handy spreadsheet file to do the maths for you, or it's "pen an' paper"

      theres a "shim swap thread" going on here where members exchange shims
      i have 1 or 2 to swap as well
      bike wreckers in nz are likely to have some
      as usual, www.z1enterprises is a good source

      used shims are fine, no need to buy new
      Thanks for that. I will try Z1 and I see Steve's offer re the spreadsheet. This sure is a great forum. It's terrific how people share knowledge/experiences.


      Originally posted by Steve View Post
      Send me an e-mail, I will send the spreadsheet in reply. 8-[
      .
      Thanks Steve. Email sent. I appreciate your assistance.

      Originally posted by psyguy View Post
      yeah, i know
      that's where www.z1enterprises.com come in
      you do need to e-mail them and ask if they can get all that (and they most likely can) and the shipping rate is much more realistic, but it does take a bit longer (like 2-3 wks) if they dont have all the parts in stock and due to the time eaten by all the correspondence

      also, from experience, you can talk to b-bandit and ask them to adjust the shipping to whats realistic for those few parts that they can stick in an envelope (website gives you a generic minimum shipping based on a small box -and thats not always the case)
      Cheers for that. I'll send them an email and ask them. Looks like I won't be catching up at the ATNR for a couple more weeks.

      Comment

      Working...
      X