Cheers. Don
Announcement
Collapse
No announcement yet.
New Airbox Rubbers For Gs550b
Collapse
X
-
New Airbox Rubbers For Gs550b
I know that you cannot purchase new intake airbox rubbers that go between airbox and carbs for my GS550B. Has anyone done a conversion for this model (I think the GS750B would be similar) to use some other tube off another model or made something up to fit. Or does any member have some soft rubbers that will fit which I could purchase. Any suggestions to help me out would be greatly appreciated. BTW three rubbers aren't too bad, reasonably soft and the other one is hard as rock.
Cheers. DonTags: None
-
KRISTI'SGS550
Don,
that is too bad you can't find these parts, I guess you will need to find someone who did a air pod conversion and hopefully they still have their rubber boots. I will keep my eyes open for them on ebay and locally for you.
Cory
-
Suzuki_Don
Originally posted by KRISTI'SGS550 View PostDon,
that is too bad you can't find these parts, I guess you will need to find someone who did a air pod conversion and hopefully they still have their rubber boots. I will keep my eyes open for them on ebay and locally for you.
Cory
Comment
-
KRISTI'SGS550
Don,
your intake boots from your 77 Gs550B look a lot like the boots on my 81 GS550T, do you want me to measure them so you will know if they will fit or not? If they are the same you can order the ones for the 1981, either at bikebandit or there is a pair on ebay right now. Let me know if you would like measurements. And what measurements you would like.
Cory
Comment
-
Suzuki_Don
Originally posted by KRISTI'SGS550 View PostDon,
your intake boots from your 77 Gs550B look a lot like the boots on my 81 GS550T, do you want me to measure them so you will know if they will fit or not? If they are the same you can order the ones for the 1981, either at bikebandit or there is a pair on ebay right now. Let me know if you would like measurements. And what measurements you would like.
Cory
Cheers. Don.
Comment
-
KRISTI'SGS550
yes, don that might be a problem. But I will measure them for you anyways. Maybe you can make something work.
Cory
Comment
Comment