using hand controls from a different bike on the GS?

[doctorgonzo]

i'M SLIGHTLY CONCERNED ABOUT THAT TOO.

OOps

Well, if it's a "drop" that would suck (I kept my original as well), if it's because you laid the bike down on the road, probably bigger worries.
:-)

[Billyboy]

Well, I guess if I'm going to drop it I better do it on the left.

[Talon]

well that looks to me to be a honda shadow brake lever... i know because i had to replace one from a drop, i dropped my suzuki and my honda also went over at the same time... but its looks exactly like shadow brake lever. if you are talking about the master cylinder in the ebay link that is.

[doctorgonzo]

Well, I guess if I'm going to drop it I better do it on the left.

Or put REALLY big crash bars on!

[J_C]

Talon, great to know thanks

My GS went over thanks to the assistance of a late night hooligan. It was to the left side and the clutch lever was fine, here's to hoping the same would stay true to the right side =]

[Billyboy]

Talon, great to know thanks

My GS went over thanks to the assistance of a late night hooligan. It was to the left side and the clutch lever was fine, here's to hoping the same would stay true to the right side =]

I would be filled with murderous intentions.

[J_C]

I was, I didn't catch the guy. Luckily the SV broke its fall lol

[J_C]

FYI, to actually speak to this thread, I've been long considering getting the left hand controls off an SV on ebay to replace the junky stock controls I have now (I could care less about turn signal self cancellation). The price/condition has just never been right