gs 16 valve L model speedo drive picture

[Headphase]

Can anybody post a picture of a twin disk L model front wheel, left hand side, the closer up the better, so I can see how the speedometer drive sits against the fork leg please?

I didn't pay any attention when taking the forks off, doh.

Needs to be an L (the leading axle forks).

thanks very much.

[J_C]

Can you get what you need from this picture?

[bwringer]

Yup, that's the correct angle in the photo. The cable screws in at a 45 degree angle from the bottom rear.

It's kinda strange, but that's the way L models are set up.

[Headphase]

perfect thanks. Thats the only way I could see it going, but it seemed like a bit of a wierd way to do it.
Shoulda paid more attention when taking the front apart, but the last thing I was bothered about was the speedo drive.

thanks again guys, much appreciated.
\\/