K&N pods..

[Johnny K]

I have FINALLY finished my whole top-end rebuild and will get pics once it is cleaned up. I have a stage 3 dyna-jet with a V&H exhaust with stock air box. My mechanic said that the carbs are already jetted and can put the pods right on. When I put the pods on, will the bike act up because of the change? Would I have to change any settings on the carbs after? And just say that I put them on and don't know how to change settings on carbs and all, can I put the stock air box back on with no problems meaning not having to change any settings?? Hope you guys understood my quest. Thanks again.

[SqDancerLynn1]

If it is already jetted just put it together. From what you have YOU DO NOT want the stage 3 only the stage 1 with the stock airbox

[Johnny K]

Okay. I think it is a stage 1 then. I do know that he told me that they were already jetted, probably just misunderstood the stage number. Thanks.

[psyguy]

or maybe it is stage 3? - thats what you want if you want to go with pods as well as 4-1 pipe

anyhow, you shouldnt have much problems starting/running with any combination of jets/pipe/airfilter - but you do want to make sure what exactly is in your carbs so that you do not run too lean (can damage the engine) and do get the best performance

[psyguy]

[quote=Johnny K;799614]I have a stage 3 dyna-jet with a V&H exhaust with stock air box. My mechanic said that the carbs are already jetted and can put the pods right on.[/quote]

that sounds perfect - youst double check that IS the case

[Johnny K]

Thanks psyguy. Yeah, I will def talk to him before I put them on. Thanks again.