Who makes 4 into 1 headers for GS's?

[Anonymous]

Or more specifically, a 4-to-1 for an '82 GS1100GLZ. I'm trying to look up a couple of suppliers online, but with little success. Any insight is appreciated.

[redliner1973]

Try Dennis kirk, they sell 4to1's, and should have the brands listed also. :twisted:

[SqDancerLynn1]

Vance& Hines GS1100G/GL 82-83 PN 25-429 $284.99
from Dennis Kirk

[Dink]

Try www.supertrapp.comthey sell both Supertrapp and Kerker and list for most GS's as well.
Dink

[Anonymous]

G's and E's...

Thanks for all the help, but I'm only seeing listings for GS1100E's, not the G/GL's. I'm not sure if there's any difference in regards to exhausts or not.

Anyone know if they're compatable?

[R-Tru-D2]

maw

Try www.mawonline.com and search by make/model
You should find Mac and Vance&Hines for your model. Price ranges from about $180 to $230.

[Guy]

I've put a stainless 4 into 1 exhaust off a 1200 bandit on my GS 850. Works fine, sounds great...........

[SqDancerLynn1]

Guy did you have to modify the bandit exhaust for your 850? do you have a G or GL

[Guy]

I took the exhaust off a doner GS 850 I bought for spares. It looks like the header clamps have been modified, but I can't tell exactly what was done. I had to dispense with the centre stand to accomondate this pipe. I also upped the main jets from 115's to 125's to compensate for the slightly lean cindition caused by the lower back pressure, and it now pulls nicely to the redline.