Announcement

Collapse
No announcement yet.

Running Rough

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Running Rough

    Finally started my old 1000g after it had been sitting for about 2 years.
    What a buzz, I had forgen how much fun it could be.
    Starts ok and runs at low revs fine.
    The problem is I cant get it over 2k revs while riding, in neutral it revs out ok with only minor misses.
    Any ideas.
    Craig

    #2
    carbs clogged from sitting?
    kinked fuel line?
    in-line filter (if you have one) restricts the fuel flow?
    any old fuel wouldnt help either
    GS850GT

    Comment


      #3
      What kind of "minor issues" does it have while idling?

      Comment


        #4
        Running Rough

        Checked petlock ... prime clean flow
        on and reserve only flows while running
        Idles well no misses
        plugs very sooty I will clean them up and give it another go.
        Havent put the air box on yet but that shouldnt cause a problem
        Craig

        Comment


          #5
          if you donthave the air box in with a filter your bike can run like crap. My 650gl wont even start without the airbox

          Comment


            #6
            Running rough

            Wouldnt it just run lean without the airbox?

            Craig

            Comment


              #7
              Originally posted by Craig54 View Post
              Wouldnt it just run lean without the airbox?

              Craig
              No. There are a couple of things that come into play here. The inlet tubes in the airbox smooth the airflow into the carb throat to minimize turbulence which would affect its ability to properly meter fuel. Another thing is that the carbs require a certain amount of restriction for all the parts to work properly. You need either a stock airbox or pods to provide that restriction. Another quick fix for testing purposes only is to fold a shop rag in half and drape it over the inlets of the carbs. Use zip-ties to hold the rag to carbs 1&4, keeping it somewhat taut over 2&3. This will allow the bike to run, but it is not accurate enough to check your jetting.

              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

              Comment


                #8
                Common problem newbies try & run their GS without the airbox. It's NOT going to happen

                Comment


                  #9
                  Originally posted by Craig54 View Post
                  The problem is I cant get it over 2k revs while riding, in neutral it revs out ok with only minor misses.
                  Any ideas.
                  Craig
                  so, was this with NO airbox
                  GS850GT

                  Comment


                    #10
                    Running rough

                    Yep no airbox

                    Craig

                    Comment


                      #11
                      well, make sure you have a properly sealed airbox (as well as the whole intake system) and start from there
                      you cant really troubleshoot the fuel delivery system if part of it is missing
                      GS850GT

                      Comment


                        #12
                        Running rough

                        Thanks guys
                        what a difference
                        Airbox on and away we go
                        Wow I forgot what a buzz it was to go for a ride
                        Box is sealing well except that I cant figure out where the hose coming out of the top goes??? so its still sucking some air.
                        There is still the odd miss/ flat spot but its minor I havent cleaned the plugs yet and it has been sitting for about 18months.
                        Craig

                        Comment


                          #13
                          glad to hear such a basic thing as adding an airbox worked so well :-D

                          you re prob talking about the engine breather hose that goes on top of the valve cover

                          should run even better once that is in place too
                          GS850GT

                          Comment


                            #14
                            Running Rough

                            Thanks for the input guys.
                            Put the airbox on and yep big difference.
                            Still a bit of a flat spot but only minor.I am happy to be able to go for a ride again
                            What a great site I keep finding new info every day
                            Thanks again.
                            Craig

                            Comment

                            Working...
                            X