Making a cheap quick signal mount that attaches to your forks?

[Talon]

hey has anybody made a cheap and quick signal mount that would attach to a set of forks?

I have to get my new ninja inspected to be able to register it and its lacking any plastics so the stock signals that i have for it have nothing to mount to, so i'm going to "borrow" my signals from my GS and use them on my ninja to pass the inspection, and the people over here seem to be a bit more resourceful with this kind of thing then the people at the 10r forums.

anyway i'm thinking of something quick dirty and cheap (like hose clamps with rubber, only i need a way to attach the signal to that)

anybody have any ideas?

[Zooks]

Hose clamp and small angle bracket (like you'd use for woodwork).

[Zooks]

I use brackets like these for all sorts of things on cars, trucks, bikes, around the house, workshop etc.

[nert]

zooks
you are resourceful. and thanks again for the tip on the "G" bevel gears.

[Billy Ricks]

How about a short piece of flat aluminum bar under a pinch bolt on the lower triple?

[BassCliff]

Hi Mr. Talon,

For a real "down and dirty" solution, at your local bike shop you might be able to find some cheap turn signals that use a circle clamp to your handlebars.

Something like this:

http://cgi.ebay.com/ebaymotors/HONDA-KAW-YAM-SUZ-HANDLEBAR-MOUNT-TURN-SIGNAL-PAIR_W0QQitemZ380006849906QQcmdZViewItem

Thank you for your indulgence,

BassCliff