Announcement

Collapse
No announcement yet.

might be a dumb question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    might be a dumb question

    i have CV carbs on my 82 gs1100g.. and i got looking at some carb pics today, and noticed that the cv carbs in the pics had air screws... mine are solid, no screw, just a peice of brass. is that normal?

    #2
    Should be a screw under a small round aluminum cover.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment


      #3
      huh mebby it is a cover.. i didn't poke it too much.

      Comment


        #4
        American carbs from 1980 up are sealed.
        I got a set for my 83 1100E from Canada that have open exposed air screws. (up on top easy to get to!)

        Comment


          #5
          lots of info if you search. drill small hole into the plug ONLY drill about 1/8th-3/16 inch into the plug Pull plug out with a self tapping screw

          Comment


            #6
            Originally posted by SqDancerLynn1 View Post
            lots of info if you search. drill small hole into the plug ONLY drill about 1/8th-3/16 inch into the plug Pull plug out with a self tapping screw
            i only read the first 5 or so hits off search

            Comment

            Working...
            X