Announcement
Collapse
No announcement yet.
Will an exhaust leak cause a lean condition?
Collapse
X
-
Will an exhaust leak cause a lean condition?
I put on my new Jardine a few weeks ago, and took the bike on a road trip. When I got home, I noticed that pipe #3 had obviously gotten hotter than the rest and had discolored a bit from being lean. I check it's plug and it was white. I took the header off for cleaning, and noticed #2 exhaust port had an extra gasket in it. So I think maybe pipe #3 wasn't seated properly and leaked. Would that have caused the lean condition on that cylinder? Or should I be looking for something else?Last edited by renobruce; 05-18-2008, 06:45 PM.Tags: None
-
80GS750
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 44506
- Brooksville Fl.
Exhaust is just that. When the engine is at the point of exhausting, it has already burned the mixture and is through with it. Lean or rich is a function of intake.
EarlKomorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
Not an expert but I think the exhaust leak would draw air into the pipe. Not sure this would cause a lean mixture though as evidence of the white plug. A blue pipe is a likely result.Last edited by Nessism; 05-18-2008, 10:38 PM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
SPARKSS
Originally posted by renobruce View PostI put on my new Jardine a few weeks ago, and took the bike on a road trip. When I got home, I noticed that pipe #3 had obviously gotten hotter than the rest and had discolored a bit from being lean. I check it's plug and it was white. I took the header off for cleaning, and noticed #2 exhaust port had an extra gasket in it. So I think maybe pipe #3 wasn't seated properly and leaked. Would that have caused the lean condition on that cylinder? Or should I be looking for something else?
Even on a feedback system (a system using an oxygen sensor.....modern electronic fuel injection.....or some carb systems), an exhaust leak might result in a rich mixture (because the O2 sees the lean exhaust and the computer corrects this input by requesting more fuel). Sometimes it isn't even detected
Comment
-
80GS750
doesnt adding additional exhaust flow cause a lean condition cause there is no backpressure or less pressure on the engine???
Comment
-
Originally posted by 80GS750 View Postdoesnt adding additional exhaust flow cause a lean condition cause there is no backpressure or less pressure on the engine???
Comment
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter
Super Site Supporter- Oct 2003
- 17441
- Indianapolis
Originally posted by 80GS750 View Postdoesnt adding additional exhaust flow cause a lean condition cause there is no backpressure or less pressure on the engine???
The question is, how much was it leaking? It seems to me if it was that bad, it would have been really annoyingly noisy, so I'm thinking an experienced rider/wrench such as RB would have noted and tracked down the exhaust leak within about 5 seconds.
It's very hard to tell, though, how much exhaust leak it would take vs. how noisy and noticeable the leak would be.
Guess you'll just have to fix the leak, change the plugs, and see what happens.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
Comment
-
TheCafeKid
However, if your Jardine flows better than the VH, it could lean it out just a tad. You have the jetting set up for the best result with the VH, right? You may have to change it SLIGHTLY for the Jardine.
Comment
-
Originally posted by renobruce View PostThat was my thinking as well. If going from a stock pipe to a header leans things out, why wouldn't an exhaust leak?
Your new Jardine may be causing it but not likely, as you should have noticed all your plugs showing leaness, not just #3. Have you done any radical mods to your GS ????
Contrary to what some have said, a chronic exhaust flange leak will change the scavenging efficiency of that pot. Lower back pressure does affect torque and cylinder filling especially at lower rpms. If the leak is that bad, you should hear it under load and experience serious backfiring on decel.:) The road to hell is paved with good intentions......................................
GS 850GN JE 894 10.5-1 pistons, Barnett Clutch, C-W 4-1, B-B MPD Ignition, Progressive suspension, Sport Demons. Sold
GS 850GT JE 1023 11-1 pistons. Sold
GS1150ES3 stock, V&H 4-1. Sold
GS1100GD, future resto project. Sold
http://i155.photobucket.com/albums/s...s/P1000001.jpg
http://i155.photobucket.com/albums/s...s/P1000581.jpg
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13969
- London, UK to Redondo Beach, California
Didn't you say you'd just finished a ride over near TOM (Who lives at Sea Level) in really cold & wet temps???
Surely Sea level = Lean, Cold air = lean.....
Just a thought. Maybe that one needs a pilot fuel screw tweek...
Dan1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
AHH, back to the jetting game. Have fun Bruce. :-D
If it leaked REALLY bad it would be lean. I would be suprised if you couldn't hear it though.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Originally posted by salty_monk View PostDidn't you say you'd just finished a ride over near TOM (Who lives at Sea Level) in really cold & wet temps???
Surely Sea level = Lean, Cold air = lean.....
Just a thought. Maybe that one needs a pilot fuel screw tweek...
Dan
Originally posted by chef1366 View PostAHH, back to the jetting game. Have fun Bruce. :-D
If it leaked REALLY bad it would be lean. I would be suprised if you couldn't hear it though.
Comment
Comment