Announcement

Collapse
No announcement yet.

Stator starter clutch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Stator starter clutch

    GS1000g

    Putting the new starter clutch in.
    I notice when I took it out the large gear would spin one way but not the other.
    When I tighten the main bolt up in the middle of the rotor the large gear that engages with the starter gear no longer free spins one way.
    is something missing.
    I have put the spacer and two new bearings back in.
    Craig

    #2
    Something is wrong It should freewheel in one direction.

    Comment


      #3
      Stator starter clutch

      Took it off looked at it put it back on....all good...spins fine
      Could I have over tightened it with the rattle gun????
      Craig

      Comment


        #4
        when dealing with any bike, especialy one made in the 80's a impact gun should not be within a hundred yards!!!
        way to many things can go real expensive real fast. especialy with the crank!!

        Comment


          #5
          Stator starter clutch

          Thanks

          Good point

          Comment

          Working...
          X