Announcement

Collapse
No announcement yet.

Clutch Hub Removel

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Clutch Hub Removel

    Can you remove the nut from the clutch hub by leaving the bike in gear and stepping on the brake. How hard is it to pull the hub off?
    Tags: None
    #2
    Sometimes that will work with a 32mm socket and a breaker bar. I bought a Harbor Freight electric impact driver. I works great for the clutch hub nut and the counter sprocket nut.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment

      #3
      Originally posted by j31driver View Post
      How hard is it to pull the hub off?
      Once the nut is off the hub comes right off.
      EZ Clutch overhaul - The GSResources Forums
      http://www.thegsresources.com/_forum/showthread.php?t=125593&highlight=clutch+slip
      This forum contains old posts which may have information which may be useful. It is a closed forum in that you can not post here any longer. Please post your questions in the other technical forums.


      82 1100 EZ (red)

      "You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY

      Comment

        #4
        If you have mag wheels you can also put a 2x4 between the spokes

        Comment

          #5
          Thanks, guys

          Comment

            #6
            Good opportunity to replace it with the heavy duty one.



            GS Zone - Clutches
            http://gszone.biz/clutches.html
            Speed Merchant
            http://www.gszone.biz

            Comment

              #7
              I welded up one of these from an old steel clutch plate.
              Works great.

              Comment

              Previous template Next
              Working...
              X