Announcement

Collapse
No announcement yet.

Carb Cleaning 79 GS750L

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb Cleaning 79 GS750L

    Continuing the Saga on my 79 GS750L

    I read through the picture by picture carb cleaning document on the home page. Is there an easier way? Do I have to dissamble in entirety all four carbs. I am not totally sure the carbs are a problem but I can't really figure out any other reason it seems to bog down a little (I am getting fuel just fine). Is there another thread/post I could look for?

    Thanks

    #2
    hmmm

    to tell you the truth you really cant be sure unless you know for a fact the carbs are running properly and that all else is set correctly..

    airbox sealed, new o rings, exhaust correct, valves set right....

    other than that following the carb rebuild steps is the best way to be sure its gonna run properly

    Comment


      #3
      VM or CV carbs?
      And no there is no other way.
      1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
      1985 GS1150ES stock with 85 Red E bodywork.

      Comment


        #4
        VM type...These are EASY bro. Just do it, you'll be glad you did.

        Comment

        Working...
        X