Vetter Saddlebag Mount Needed

[jrazz]

I looked through search and found that a GS750, 1000, and 850 will work interchangeably (the mounts for the Vetter trunk and hard cases. I have a 1979 GS850 GLT that I want to reattach the trunk and hard cases to. The windjammer is already installed but the mounts for the hard cases and trunk are not (although the trunk has everything there to be mounted).

Any resources on where to obtain mounts (ebay does not have them currently) or a diagram/layout on how to fashion my own? I have been to Vetter's website and found some useful pictures (and with the understanding that a GS750 mount will work on an 850, I also found a useful part number) but I cannot find the mounting kit or any type of instructions on how to make my own.

Would any of you mind pointing me to a resource that does have this information? If any of you have this bike (or a 750 or 1000) and have the trunk and saddlebags attached, would you mind sharing some information on how the mounts attach and maybe some measurements?

Thanks.

j razz

[SqDancerLynn1]

the only thing to do is keep checking on ebay. The basic frame is the same, just the mountiing is bike specific.

[dennis roy]

I have a set of vetter bags, trunk complete with all the brackets. If you want I can take some pics.

[JayH]

Send me a PM and I'll get some pics out to you. I think I have a set that will fit your bike if you are interested.

[jrazz]

I actually found a diagram and a picture on Vetter's site (I was looking under the trunk section when I should have been looking under saddlebags). I will PM you about the mounts.

Thanks guys.

j razz