Thanks in advance for any help!
Announcement
Collapse
No announcement yet.
Oil pressure!!!
Collapse
X
-
Torque
Oil pressure!!!
Hi! The oil light on my 81 GS1000 stopped working a few day ago, so I decided to install a pressure guage! After installation I took it for a spin and it is reading 0! When I give it gas it moves a little but only to about 5 pounds! The oil light always went out as soon as it started. The reason I didn't fix the light is that it was the oil pressure sending switch that went out and I have been wanting to install a guage for a few weeks now.
Thanks in advance for any help!Tags: None
-
Torque
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
The oil pressure sensor is almost 100% foolproof, the problem most likely is either a wiring issue or a burned bulb.Last edited by Nessism; 06-10-2008, 09:51 PM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
catbed
fun fact alert: some GSs have roller bearing cranks so they dont need the high pressure systems as regular bearing cranks do.
Comment
Comment