Announcement

Collapse
No announcement yet.

Oil pressure!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Oil pressure!!!

    Hi! The oil light on my 81 GS1000 stopped working a few day ago, so I decided to install a pressure guage! After installation I took it for a spin and it is reading 0! When I give it gas it moves a little but only to about 5 pounds! The oil light always went out as soon as it started. The reason I didn't fix the light is that it was the oil pressure sending switch that went out and I have been wanting to install a guage for a few weeks now.
    Thanks in advance for any help!

    #2
    They're low pressure oil systems on the 1000 - your pressure is ok.
    79 GS1000S
    79 GS1000S (another one)
    80 GSX750
    80 GS550
    80 CB650 cafe racer
    75 PC50 - the one with OHV and pedals...
    75 TS100 - being ridden (suicidally) by my father

    Comment


      #3
      AWESOME!!! Thanks for the reply! I was freaking out!!!

      Comment


        #4
        The oil pressure sensor is almost 100% foolproof, the problem most likely is either a wiring issue or a burned bulb.
        Last edited by Nessism; 06-10-2008, 09:51 PM.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          fun fact alert: some GSs have roller bearing cranks so they dont need the high pressure systems as regular bearing cranks do.

          Comment

          Working...
          X