.png "Powered by vBulletin")
Having problems removing my seat. I've had several people look at it and no one can figure it out. There are 2 levers (one on each side) on the underside towards the middle of the seat but there is something that is holding the seat towards the rear. Is there a trick?
-
-
Two bolt under the seat one on each side near the rear connected to the frame.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
-
Yup, found em. Thanks a bunch!Comment
-
Like to drink Kamakazis or are you a suicide biker? :-)1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Definetly not a suicide biker, and not much of a drinker either. It's actually a name I picked out (some time ago) for an online game (w/ forum) that I still play. I figured it would be easier to remember than some other random acct nameComment
Comment