.png "Powered by vBulletin")
Anyone know if a left hand switch from a '79 GS 550 or 750 (non-self-cancelling signals) will plug in the same plug as a '79 GS 1000 left hand switch (self-cancelling signals)? Thanks.
-
-
Match part numbers here1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
-
The part #s will be different. Best way is to check the wiring diagram. But it's Not to dificult to rewire one if you can solder. Not sure if it will be Piug & play I used one from a 750 on my GS850 but the plug had been cut off.Comment
-
most likely NOT as the self-cancelling switch has more wires than the other one
you can make it work with a little soldering but you'll loose the self-cancelling featureGS850GTComment
Comment