Announcement

Collapse
No announcement yet.

Do I need to go up one size main jet ...?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Do I need to go up one size main jet ...?

    I'm planning to use a drop-in (stock config) K & N air filter in my GS850GLZ. Currently I'm cleaning/rebuilding the carbs and will soon try to fire up the bike. No pods, just putting a K & N filter in the airbox.

    I haven't installed the carbs back on the bike yet, as I'm still doing some other work in preparation for the "start-up" event.

    All carb parts are stock, except I raised the jet needles .050" (approx. one notch).

    The stock mains are 115's. Should I go up to 120's because I'm using the K & N air filter??

    Just wondering if any of you guys have any experience with this.

    thanks,

    mike
    '85 GS550L - SOLD
    '85 GS550E - SOLD
    '82 GS650GL - SOLD
    '81 GS750L - SOLD
    '82 GS850GL - trusty steed
    '80 GS1100L - son's project bike
    '82 GS1100G - SOLD
    '81 GS1100E - Big Red (daily rider)

    #2
    I don't think you need to go up on the main, at least I didn't after dropping in a K&N. Runs great.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Originally posted by Nessism View Post
      I don't think you need to go up on the main, at least I didn't after dropping in a K&N. Runs great.

      Thanks - I'll keep it stock then...

      mike
      '85 GS550L - SOLD
      '85 GS550E - SOLD
      '82 GS650GL - SOLD
      '81 GS750L - SOLD
      '82 GS850GL - trusty steed
      '80 GS1100L - son's project bike
      '82 GS1100G - SOLD
      '81 GS1100E - Big Red (daily rider)

      Comment


        #4
        See how it runs, then do what it needs.
        Pods on my GS1000 needed a big change, K&N in the box only needed a small change, one jet size.
        The 4-1 pipe was already on there, and things are weird from the elevation around here anyway.
        If your bike was on the verge of being too lean as it was, a bigger main will be right.
        Last edited by tkent02; 06-12-2008, 10:15 AM.
        http://img.photobucket.com/albums/v5...tatesMap-1.jpg

        Life is too short to ride an L.

        Comment


          #5
          Originally posted by tkent02 View Post
          See how it runs, then do what it needs.
          Pods on my GS1000 needed a big change, K&N in the box only needed a small change, one jet size.
          The 4-1 pipe was already on there, and things are weird from the elevation around here anyway.
          If your bike was on the verge of being too lean as it was, a bigger main will be right.
          Thanks mr. tkent,

          I have no history on how the bike ran - it's been sitting for 15 yrs. I was just looking for a good place to start... The current plugs (Champions!!) are a mix of 2 black & 2 whilte - hoping that doesn't mean a bad coil.

          I visit Lousiville (up the road from you) every now & then - my wife is from there. i really love the Boulder area. But you're right, the elevation is UP there - we like to go to Brainard Lake & look for mushrooms, that's somewhere arounf 10K elevation if I remember correctly. Engines run different at that O2 level for sure.

          Regards,

          Mike
          '85 GS550L - SOLD
          '85 GS550E - SOLD
          '82 GS650GL - SOLD
          '81 GS750L - SOLD
          '82 GS850GL - trusty steed
          '80 GS1100L - son's project bike
          '82 GS1100G - SOLD
          '81 GS1100E - Big Red (daily rider)

          Comment

          Working...
          X