Announcement

Collapse
No announcement yet.

Relay Mod Fuse Size

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Relay Mod Fuse Size

    Can't find any info about the size of fuse everyone is using for this mod....

    I'm going to put an inline blade fuse between the battery & the relay/coils on the main feed. I can see a bunch of people have done this but no size info.

    What's recommended?

    Cheers,

    Dan
    1980 GS1000G - Sold
    1978 GS1000E - Finished!
    1980 GS550E - Fixed & given to a friend
    1983 GS750ES Special - Sold
    2009 KLR 650 - Sold - gone to TX!
    1982 GS1100G - Rebuilt and finished. - Sold
    2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

    www.parasiticsanalytics.com

    TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

    #2
    I used a 10 amp. I think it is right on the diagram if you go to Bikecliffs web page.

    Comment


      #3
      Thanks, couldn't find that page before... one says 20, one says 10amp on the same page. Guess I'll try a 10 & step it up if any problems. The wires I'm using will be far more capable than 10 amps in any case...

      Dan
      1980 GS1000G - Sold
      1978 GS1000E - Finished!
      1980 GS550E - Fixed & given to a friend
      1983 GS750ES Special - Sold
      2009 KLR 650 - Sold - gone to TX!
      1982 GS1100G - Rebuilt and finished. - Sold
      2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

      www.parasiticsanalytics.com

      TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

      Comment


        #4
        The fuse I used is exactly like what you are describing; an inline blade fuse (10 amp).

        Comment

        Working...
        X