joshua
Announcement
Collapse
No announcement yet.
valve shim kits
Collapse
X
-
joshua
valve shim kits
Anyone know a good source for these? I found one on Z1 but they only had a kit that came with a big case and a tool that was a little over 100. I was really hoping to spend quite a bit less, without having to tear into it, find out which ones I need, and ordering individual ones. Thanks!
joshuaTags: None
-
TheCafeKid
You can order individuals from Z1 as well. Up top above the engine parts page, you'll see a link that says SHIMS. clicky clicky and you'll open the vault of shims! YAY!
-
heathen
i just went by my local suzuki shop and the service manager sold me some he had for $3.00 each. they wanted $11 each at the parts department. might try that where you are.
Comment
-
I swapped mine even-Steven with my local Suzuki dealer.
He had boxes of them.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35601
- Torrance, CA
Local dealer in my area will swap for free but their box is filled with fat shims and very few thin ones. Best to just order a handful from Z1.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment