Announcement
Collapse
No announcement yet.
Stator swap
Collapse
X
-
Stator swap
Are all the gs stators interchangeable physically. Im not so worried about wiring right now. Just want to know if the size and bolt patterns are the same for 8 valve models.Tags: None
-
BassCliff
Hi Mr. Tarbash 27,
Some, but not all, of the stators can interchange between models. It'll take some research at the stator vendors' websites and online parts fiches. Which models were you hoping were compatible?
Here's a note from Electrosport:
NOTE: These 8-valve GS750 models have a 12-pole three phase stator that has identical dimensions to the later 18-pole units (=ElectroSport ESG010). You can use an ESG010 in these older 8-valve models, but you will have to use the later model (80-83) GS850 flywheel. If you fail to change the flywheel the number of magnet poles does not match the stator and you will have NO OUTPUT from your new 18-pole stator.
Thank you for your indulgence,
BassCliffLast edited by Guest; 06-27-2008, 06:29 PM.
-
Tarbash 27
I have a 79 gs1000 motor I will be putting in my 79 750. I have 79 GS750"L" wiring on my bike. I currently have an 82 GS550L stator in the 750 motor now. I want to get a brand new stator.
Comment
-
BassCliff
Cooking with electrons
Originally posted by Tarbash 27 View PostI have a 79 gs1000 motor I will be putting in my 79 750. I have 79 GS750"L" wiring on my bike. I currently have an 82 GS550L stator in the 750 motor now. I want to get a brand new stator.
The three yellow output wires from the stator will connect to the three yellow input wires on the regulator/rectifier (if necessary, replace the two separate regulator and rectifier units with an integrated r/r unit).
Double-check to be sure, but any of these should work in your GS1000 motor.
http://www.ricksmotorsportelectrics....p?c=partLookup (You want part# 21-303)
This page has some very handy information:
Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
-
knotzilla
-
GQROD
Originally posted by jknappsax View PostHow is Electrosport's QC these days? The Electrex stuff had a good reputation, but I remember that when the name changed to Electrosport, there seemed to be quality control issues, especially with the R/Rs. As far as the stators, is there a preferred brand?
Hope this helps.
Comment
Comment