Announcement

Collapse
No announcement yet.

How do these carbs look?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    How do these carbs look?

    Sorry for all the noobie questions, but I don't want to mess this up. If you haven't seen my other post, I am in need of a set of carbs for a 79 gs1000. I was leaning towards a rebuilt set from wiredgeorge, but these look pretty good and would be a hell of a lot cheaper. How do they look?


    #2
    well if he did all the cleaning like he said he did, than thats a good set of carbs...

    if you dont win them, i will have a set from a 77 gs750 for sale in the next couple weeks.....

    Comment


      #3
      Looks like crud on the bottom of the float bowl based on the photos. Any carbs you get off ebay need to be broken down and verified as clean and having soft fresh o-rings installed.
      Last edited by Nessism; 07-09-2008, 12:34 AM.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment


        #4
        My fiirst concern...

        Is in looking at the photo I see all of the main jets are set different. As I understand it, there is no good reason for that execept for crud and bad placement. I'd look into purchasing something from oldbikebarn.com, or perhaps here: http://www.babbittsonline.com/ .

        Good luck.

        You know, the only difference between you present carb and those would be replacing rubber parts, deep cleaning every part and that you know your carb inside and out in detail from cleaning and rebuilding. Search for "rebuild" on this site. Some had a detailed line to how to do the rebuild. This guided me on how to do this on a GR model, a rare cousin of the GS...

        Comment


          #5
          Is in looking at the photo I see all of the main jets are set different. As I understand it, there is no good reason for that execept for crud and bad placement. I'd look into purchasing something from oldbikebarn.com, or perhaps here: http://www.babbittsonline.com/ .

          HAS NOTHING TO DO with crud You need to tune them to your bike

          Those carbs look fine. expect to pay $50-100.. ANYTHING you buy on Ebay -- Plan on a good cleaning.. just makes good sense
          carb cleaning pictorial http://members.dslextreme.com/users/bikecliff/
          Last edited by Guest; 07-09-2008, 12:40 AM.

          Comment


            #6
            80GS750 i sent you an email.

            Comment


              #7
              so babbittsonline sells complete carbs?

              Comment


                #8
                eBay carbs

                When I got my GS1100EZ it had no carbs at all. I found a set for cheep on eBay and bought it. It had some parts missing. Got a nice rebate and kept the carbs. The second set I bought had a broken eaz-out in one of the pilot screws and it had been rejetted. ( it was sold for parts only) The third set was so crudded up that I almost gave up, but it cleaned up well and it works fine. Total investment for me was less that 100 bucks for the three so I got out ok on the deal. I will have a spare set to sell or keep. Moral of the story is you cannot depend upon the sellers to know what they are selling all the time. Two of my three came from non bikers. Clueless dudes.
                Good Luck!
                Lee

                Comment


                  #9
                  Originally posted by mklang View Post
                  so babbittsonline sells complete carbs?
                  No. And if you buy a set for a different bike, that you need to put on your 1000, DO NOT throw ANYTHING from the ones you have away. You'll need to change the choke actuator arm out, and the backing plate and a coupel other things. They ARE NOT the exact same. the carb bodies will be, but the rack itself is different. If you dont want to have to change a bunch of OTHER stuff on the bike, you'll have to change the racks.

                  Honestly tho, give them a good cleaning. If i were to buy a set of carbs that i even had a question about, i would clean them. Period.

                  Comment


                    #10
                    Don't know about those specifically, but some carbs are still available NOS... at like $800 a set.

                    Comment


                      #11
                      Originally posted by doctorgonzo View Post
                      Don't know about those specifically, but some carbs are still available NOS... at like $800 a set.
                      I may be wrong, but i doubt VM26SSs are still available, as they havent been on a bike since 79. Could be wrong tho, maybe they still use them on sno sleds or something.

                      Comment

                      Working...
                      X