Announcement

Collapse
No announcement yet.

Need Opinion....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need Opinion....

    I just finish picking up my frame and various other parts from the "sand blasters", and the finish is quite rough. Should it. They offered to blast and paint, but I am either doing it myself or I have a couple connections with autobody shop that can paint for me real cheap. Anyways is it normal to come out like that, or should I have expected a smoother finish.
    Sorry I guess this belongs in the "Appearance" section.

    #2
    I would have chosen some other type of blast media. Sand will leave a rough finish Give it lots of filler type primer & lots of sanding

    Comment


      #3
      It wasn't sand, aluminum oxide so something like that. There was quite a bit of rust on the frame, so they wanted to use something hard I guess. Also they said they do cycle frames all the time.

      Comment


        #4
        Aluminum oxide comes in different grits, just like sandpaper. Even large grit stuff is fine though for a cycle frame. Shoot some nice epoxy primer on it and the rough texture gives the paint something to grab on to.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Originally posted by Nessism View Post
          Aluminum oxide comes in different grits, just like sandpaper. Even large grit stuff is fine though for a cycle frame. Shoot some nice epoxy primer on it and the rough texture gives the paint something to grab on to.
          Do you know where I can get that?

          Comment


            #6
            Originally posted by kamelman View Post
            Do you know where I can get that?
            Auto Paint store. I like PPG DP-LF epoxy. Has excellent adhesion and corrosion protection.
            Ed

            To measure is to know.

            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment

            Working...
            X