Announcement
Collapse
No announcement yet.
measurement question.
Collapse
X
-
gus33
measurement question.
I want to get a set of vacuum barbs for synching the carbs on my '78 GS1000. The manual says to remove the 4mm vacuum plug bolt but just to be sure, I measured it across the outside of the threads and it is 5mm. I seem to remember something about how some hardware is measured at the inside of the threads (it doesn't sound right, so I could be imagining it). My carbs are VM26SS...do I need a 4 or 5mm vacuum barb?Tags: None
-
gus33
Thank you, I thought so too but since the manual says the allen head plugs are 4mm I wasn't sure. I'm glad I measured and asked the question before ordering.
Comment
-
They might have meant that it takes a 4mm Allen wrench to remove them.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment