.png "Powered by vBulletin")
Okay, I confess it was cheap and complete and man it looked good and I paid the man the bucks ($200). It's a GS450 twin that is c/w carbs and airbox that I thought would make a good spare for the GS425. But looking at it with a bigger sump and a little diff in sidecovers(no kick starter), will it fit straight into my frame? Has anyone done similar??
-
-
No personal experience but my understanding is that the exhaust pipes come out at a different angle between the 400/425 and the 450. Don't think the new engine will be a direct bolt in.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Thanks Ness, will wait for a time when I need to pull the 425 out to have a look then.
Hoges.Comment
-
don't know if it would work, use the 425 headComment
Comment