After long thought COILS

[toolsmech]

nah

yes




if you are talking about the carb bowl floats, yes they need to be adjusted to a specified height

Nah they are in the front on top of the carb they have a cap on them

[psyguy]

Nah they are in the front on top of the carb they have a cap on them

those are your pilot mixture screws in there
people typically remove the caps so the screws and other bits can be inspected, passages cleaned, and the screws adjusted

[toolsmech]

valve tappets

Where would i order a set of valve tappets in an asortment of sizes?

[psyguy]

Where would i order a set of valve tappets in an asortment of sizes?

www.z1enterprises.com

but youre likely to be better off figuring out what sizes you need and ordering just those