Announcement
Collapse
No announcement yet.
pilot fuel screw part #?
Collapse
X
-
pilot fuel screw part #?
I'm trying to buy a new pilot fuel screw because I snapped one rebuilding the carbs the exploded diagrams on flatout/babitts are poor hand drawings with no resembling part! Can anyone tell me the part number?Tags: None
-
BassCliff
Hi,
Is the parts fiche at alpha-sports any better?
Thank you for your indulgence,
BassCliff
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35698
- Torrance, CA
Easiest and cheapest way to get the fuel screw is to order a carb kit from Z1... http://z1enterprises.com/detail.aspx?ID=487Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
midnightcafe
Originally posted by Nessism View PostEasiest and cheapest way to get the fuel screw is to order a carb kit from Z1... http://z1enterprises.com/detail.aspx?ID=487
a lesson learned to never reassemble carbs 3 months after ripping them apart without reading your notes!
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35698
- Torrance, CA
Originally posted by midnightcafe View Postso would the jets come with the o-rings obviously? 'cause I shredded the o-ring on the screw as well...
a lesson learned to never reassemble carbs 3 months after ripping them apart without reading your notes!
And speaking of O-rings, I trust you got an o-ring kit from cycleorings.com, including new o-rings for your intake boots. Please tell me yes. It's always best to tell people like me what we want to hear.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
midnightcafe
-
SqDancerLynn1
Anytime you remove the intake boots I would replace the O rings, you removed them for a reason yes ?
Comment
Comment