Announcement

Collapse
No announcement yet.

GS 500E Steering stem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS 500E Steering stem

    Any tricks to removing the upper fork nut? Choke control come through middle of it. Seems to be a 24 mm nut. I assume it's a special tool of some sort but I just looked through the entire tool section of the Chaparral catalog and didn't see exactly what I am looking for. Tried an adjustable wrench but it kept wanting to round off. The nut seems to be on very tight.

    Thanks.

    #2
    no way you can put a boxed end wrench on it? even if you have to cut it into a line wrench

    Comment


      #3
      Guess I need to make a trip to Sears. Checked at Home Depot and Advance Auto Parts and the biggest box end they had was a 20mm. Biggest I have is an 18mm. Thought the axle nut wrench from the ZZR tool box might work but it is too big at 27mm.

      Comment


        #4
        The axel wrench in the tool kit may be 22mm

        Comment

        Working...
        X