seuadr, I would probably ride around town and not worry too much. Can you coast down a hill with no hands ? Start saving your pennys for that deal thats sure to come your way. I bet theres 100s of those front wheels in the drag racers parts piles.
Announcement
Collapse
No announcement yet.
tire wobble
Collapse
X
-
I had a bent rim from who knows what. I rode on it for a few years. Maybe 7000 miles. I think it wore on the steering head bearings and soon developed a nasty head shake. No hands was a no go. The Bike would come unglued like right now. I got a complete front wheel, tire, and brake discs (mine were warpped) from a GSR member for $50.
seuadr, I would probably ride around town and not worry too much. Can you coast down a hill with no hands ? Start saving your pennys for that deal thats sure to come your way. I bet theres 100s of those front wheels in the drag racers parts piles.82 1100 EZ (red)
"You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY
-
seuadr
Originally posted by bonanzadave View Postseuadr, I would probably ride around town and not worry too much. Can you coast down a hill with no hands ? Start saving your pennys for that deal thats sure to come your way. I bet theres 100s of those front wheels in the drag racers parts piles.
ya, i'm gonna have to find another wheel.
Comment
-
I would check the bead. I just put a 110/90-19 tire on a 100/90-19 stock size tire. (long story on a Make Offer on fleabay) I installed the tire and went for a very short ride the next day. The tire didn't seat. I tried soap, baby powder and then WD-40 which worked. Never had this much trouble installing a tire. Had to be from the wider tire.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
seuadr
it's seated well, and holding air like a champ. we thought it might be leaking faster than normal, because of the tube, it seems to be holding air just fine. of course i'm gonna check it religiously for the next couple months just to be sure.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35590
- Torrance, CA
Check the wheel runout as Lynn suggested. Sometimes mechanics make mistakes so it never hurts to double check before you spend money.
I doubt you will have any trouble running 10 miles a day at regular speeds.
Good luck.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment