Announcement

Collapse
No announcement yet.

Carb Bolt Kit

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Carb Bolt Kit

    I was wondering if anyone knew of a allen head bolt kit for the carbs?
    Tags: None
    #2
    Look and see if you have a bolt house or something similar. Bring in the old POS phillip screws and match them up with allen S/S.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment

      #3
      Or you can try this eBay store.

      Just type "GS850 carb" in the store search window.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment

        #4
        I don't like hex key screws due to difficulty in install/removal. I bought new phillips head screws from the local hardware store. On my 850 I wanted the bike to look stock so I bought yellow chromate (I think) plated screws from Z1 Enterprises.

        Z1 Enterprises - Specializing in Vintage Japanese Motorcycle Parts, Including New Old Stock & Aftermarket Parts
        http://z1enterprises.com/catalog.aspx?pid=GS850GT-1980-CF0
        Z1 Enterprises specializes in quality Motorcycle parts for Honda, Kawasaki, Suzuki and Yamaha Classic Japanese motorcycles from the 1970's and 1980's.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

          #5
          Originally posted by Steve View Post
          Or you can try this eBay store.

          Just type "GS850 carb" in the store search window.

          .
          That's the set I have, very complete, a good deal.

          Comment

            #6
            That kits looks good, just ordered.

            Either of you order his total engine bolt kit? I bought the z1 kit for a little
            bit less, but got no washers or instructions. Easy enough to figure out, I think, if one already had the engine apart, but doing it cover by cover I'm sure I'll end up with one missing/one mis-fit. Half done now anyway, but if his kit is good, I might add it to the xmas list just to have more SS hardware on hand.

            Comment

              #7
              Originally posted by Shaughn View Post
              That kits looks good, just ordered.

              Either of you order his total engine bolt kit? I bought the z1 kit for a little
              bit less, but got no washers or instructions. Easy enough to figure out, I think, if one already had the engine apart, but doing it cover by cover I'm sure I'll end up with one missing/one mis-fit. Half done now anyway, but if his kit is good, I might add it to the xmas list just to have more SS hardware on hand.
              Yep, I have the engine kit from the same guys, also very complete.

              Comment

                #8
                I bought their GS1100 kit for my bike, was missing 5 bolts total. They shipped the first one I found for the stator cover but the rest would have taken too long so I didn't bother msging them.

                Comment

                  #9
                  I've used Burk's Motorsport for stainless bolt kits. These are the guys Z1 Enterprises uses.

                  http://www.westcoastmc.com/store/
                  Ed

                  To measure is to know.

                  Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                  Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                  Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                  KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                  Comment

                  Previous template Next
                  Working...
                  X