.png "Powered by vBulletin")
I had a broken choke tube in one of my carbs. I was able to remove it without any damage to the rest of the carb. The bike is a 79 GS1000. I am searching for a replacement tube without having to buy a rack of used carbs. Any help on this matter would be appreciated.
-
-
You might check at a hobby shop to see if they have some brass tubing that might fit.
The better stores that sell radio-control stuff will usually have a good selection.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
You can also try Art supply stores or AC Moore-arts adn crafts place similiar to Michael's but michael's does not carry it, they have a display in a red white and blue box with brass tube and brass plate.Comment
-
find a hobby shop that sells rc cars planes boats etc.Comment
Comment