gs850 shaftdrive wheel

[Steve]

No here, but I just found something interesting in another thread.


Wally, if you are still following this thread, here is a picture of a 1982 GS450GA. (I mentioned it long time ago, in post #6.)


Info gathered from All Suzuki Cycles shows that it is a 16-inch wheel. It is also shaft drive.
Not sure if it will fit your 850 final drive, but it's worth a look, if you can find one.

By the way, Nessism, yes, Grandpa said there is "always some yoyo", but it was Wally who called himself a knucklehead.

well this knucklehead has chopped his gs850 and i really hate standard bikes.(imo)

.

[psyguy]

i vote steve for the gsr governor
nesissm for second in command
and grandpa a honorary member

me?

i could be called a remote off-shore human-resources manager

[Ed Vrolijk]

dank je wel ed

i see there more dutch ppl here
and if there werent any ppl like us we would all have the same bike now aint that boring

Graag gedaan!

You're right, it would be a boring place if we all drove standard bikes. Apart from that, if all our bikes would be standard, you will never find your own bike back when visiting a GS meeting
(imagine going to every bike to see if your key fits........)
Ed

[Ed Vrolijk]

i vote steve for the gsr governor
nesissm for second in command
and grandpa a honorary member

me?

i could be called a remote off-shore human-resources manager

You forgot Basscliff!!!
Shame on you!

[psyguy]

not forgoten

well, old mate basscliff hasn't posted in this thread and he is also already a self proclaimed "unofficial official gsr greeter" which suits him just fine i recon

mind you, a "good-will minister" would be cool, too

[Steve]

You forgot Basscliff!!!

well, old mate basscliff hasn't posted in this thread and he is also already a self proclaimed "unofficial official gsr greeter" which suits him just fine i recon

OK, as Governor, my first official act will be to designate BassCliff as LIBRARIAN.

I'm sure he can handle that, along with his GREETER obligations.

.

[xxxWALLYxxx]

No here, but I just found something interesting in another thread.


Wally, if you are still following this thread, here is a picture of a 1982 GS450GA. (I mentioned it long time ago, in post #6.)


Info gathered from All Suzuki Cycles shows that it is a 16-inch wheel. It is also shaft drive.
Not sure if it will fit your 850 final drive, but it's worth a look, if you can find one.

By the way, Nessism, yes, Grandpa said there is "always some yoyo", but it was Wally who called himself a knucklehead.



.

thx steve thats really what i need the rearwheel of that bike but, since there been no gs450gaz/gad imported in the netherlands i think i cant get my hands on a wheel like that one

[Ed Vrolijk]

He Wally,
I didn't realise you're dutch. Where in the netherlands are you?
prettig weekend,
Ed