.png "Powered by vBulletin")
4n1 pipe, my plugs are on the white side, k&n filter in stock airbox, main jet is 100...what size main should i try or should i raise the needles? im more interested in the main jet, i belive this will solve the problem, i just dont want to spend a fortune swapping main jets.
-
-
Re: main jet or raise needles?
Vance and Hines specifies 116 mains for a 77-79 GS 750 using their 4 into 1 exhaust.
Earl
Originally posted by rick romeroKomorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T. -
Get the main right irst before changing the needles. You need a high load run on full throttle for a little bit, then read the plugs.Comment
-
saaz i know about running it then shutting off the bike but i dont want to buy 10 sets of main jets to get it right, they want like 10 bucks a jet 8OComment
-
saaz i know about running it then shutting off the bike but i dont want to buy 10 sets of main jets to get it right, they want like 10 bucks a jet
_________________
Ten bucks a jet? I'd be looking up a new parts supplier! Mikuni large rounds should cost no more than $2.00-$2.50 each.Comment
-
thats what the suzuki stealer wants for a jet....i found some jets on cycle recycle website for way cheaper.Comment
-
Yeah, and the cycle recycle guys are great to deal with. I buy everything I can through them.
Earl
Originally posted by rick romeroKomorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.Comment
Comment