Announcement

Collapse
No announcement yet.

Gt185

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gt185

    Ok, ok, I know it is not a GS but hear me out. I have a 1976 GT185 that I got given to me about 15 years ago. I have had it running in the past but not in almost 7 years! with the cost of gas these days, I decided to take a Sunday afternoon and see if I could get it running and I did! (rough) So does anyone know of a furum for the GT series bikes or can anyone on this site give me a hand. Just basic questions and parts resource is what i'm looking for.
    Thanks,
    J

    #2

    That will get you started.
    My first street bike was a '76 GT 380.
    Watch the oiling system !
    Good luck .

    Comment


      #3
      Here is one I found some time ago, looking for info to work on the T250 that's sitting on the back porch: Sundial Moto Sports
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        Thanks for your help, I will check these suggestions out!

        Comment


          #5
          Try this ??? www.smokeriders.com

          Comment


            #6
            Any 3 of those links will help. I used all of them when I had my 76 GT250
            Nothing like the smell and sound of a 2 stroke.
            PM if there are any questions I can help with
            Doug aka crag antler

            83GS1100E, gone
            2000 Kawasaki Concours
            Please wear ATGATT

            Comment


              #7

              Comment


                #8
                Worked on very few of these when they were new. Fairly rare over here - it was an odd size to sell as learners could ride the GT250 which was quite a bit faster so that's what sold like hot cakes.

                I also think the 185 suffered from Suzuki not knowing where to place it - sports bike or commuter? It was replaced by the X5 200 - a pocket rocket that could hang out with the 250s - and the SB200 which was most definitely a commuter.

                Sweet little motors - very quiet for a stroker. Only problems as I recall were holed pistons (mixture and timing essential - pretty much standard for the GT range) and gearbox problems (though these were probably caused by newbie riders crashing the boxes - there's nothing in the box that a GS owner wouldn't recognise).

                The last model (1977 GT185B possibly or did it get to 1979 C ?) in white was a particularly pretty bike in my mind.
                79 GS1000S
                79 GS1000S (another one)
                80 GSX750
                80 GS550
                80 CB650 cafe racer
                75 PC50 - the one with OHV and pedals...
                75 TS100 - being ridden (suicidally) by my father

                Comment


                  #9
                  Here's a 1978 but couldn't find one of a '79

                  The '77 may have been the white one you were thinking of.
                  Doug aka crag antler

                  83GS1100E, gone
                  2000 Kawasaki Concours
                  Please wear ATGATT

                  Comment


                    #10
                    Thanks Doug - that's the white one as I remember it. I don't normally go for white bikes but that was a little cutie.
                    79 GS1000S
                    79 GS1000S (another one)
                    80 GSX750
                    80 GS550
                    80 CB650 cafe racer
                    75 PC50 - the one with OHV and pedals...
                    75 TS100 - being ridden (suicidally) by my father

                    Comment


                      #11
                      Holes in the pistons ?
                      The 380's were known for that,you could count on rebuilding the top end twice a year. I did.
                      Didn't know they put the Ram Air shroud on the smaller ones.
                      It did work as advertised.
                      Good luck.

                      Comment

                      Working...
                      X