Announcement

Collapse
No announcement yet.

Lost a metal plug from one of my carbs HELP !

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Lost a metal plug from one of my carbs HELP !

    Can anyone tell me where I may be able to find one of these plugs that's in the picture ? Or would anyone have one in a scrap parts carb that I might be able to buy from them ?

    I never even seen this thing fall out. It might be down in the carb dip that's the only place that I can think that it would be.

    After I'm finished with all the carbs, I think I'll pour the dip into something and see if the plug that I misplaced shows up. If it doesn't show up, I don't know what to do. Thanks !

    http://img411.imageshack.us/my.php?image=carbplugca3.jpg

    I still can't believe I lost that thing. Just when i thought everything was going along swimmingly.
    Tags: None
    #2
    I have carbs parts out the yang. If your link worked I would probably have the part you need.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment

      #3
      While waiting for the picture to show....

      Is it similar to this?




      Check out this thread.

      The GSResources Forums
      http://www.thegsresources.com/_forum/showthread.php?t=130986

      Comment

        #4
        Got it.
        Did you lose the metal plug or the round flat o-ring?
        1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
        1985 GS1150ES stock with 85 Red E bodywork.

        Comment

          #5
          Originally posted by Riding Again View Post
          While waiting for the picture to show....

          Is it similar to this?




          Check out this thread.

          http://www.thegsresources.com/_forum...d.php?t=130986
          Yep thats it !

          Comment

            #6
            Originally posted by chef1366 View Post
            Got it.
            Did you lose the metal plug or the round flat o-ring?
            I lost the plug that should fill that hole up, the metal one

            Comment

              #7
              I'll tap one out of a junk carb body I have. PM me an address.
              1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
              1985 GS1150ES stock with 85 Red E bodywork.

              Comment

                #8
                PM sent !

                Thanks man !

                Comment

                Previous template Next
                Working...
                X