coil relay mod help

[Black 550 L]

I am doing the mod as we type but I don't understand where this 2 into 1 connector is I stripped the tape off the harness and found where 3 orange with white stripe wires connect to 1 orange and white wire but I don't see where the yellow/red wires are at please help

Ok I got the mod done seems to be alright Thanks to all who looked

[lucabond]

I think what your looking for is 1 wire usually orange /white which goes to your coils
and feeds both coils. It may go to 1 coil and jump to the other 1. That is the wire you cut so that you can connect the new wire from your relay to the coils and the other side of the wire is used to turn the relay on and off. Hpe this helps
Good luck

[Black 550 L]

Thanks yes that is what I thought. I did the mod and it starts a lot better but still doesn't run right on the top end slow to accelerate I will keep working on it and probably asking questions

[lucabond]

Have you done a valve adjustment and carb tear down and dip? These seem to be basic maintenace for these old bikes to get them to run good.
Good luck