Announcement

Collapse
No announcement yet.

1980 GS1100L parts needed.......

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1980 GS1100L parts needed.......

    I need a fuel tank. Handle bars, but not sure I want the "L" kind? Left and right controls,gauges, rear master cylinder with brake lines. Brake switch. Govenor assembly(bolt, washer etc.)Air box complete. Everything required to mount front headlight. Signal generator cover. Do I have to use a "L" seat or will an "E" seat fit?

    I have a set of 1100E front forks...what do you think about putting these on? Basically I have a complete 1980 1000GL and I want to set this one up a little different...


    I'm tracking this stuff On EBAY but thought I would put a feeler out there and see if anyone has the stuff?

    #2
    The GSR has a Parts Wanted forum so please post there and not in the Technical forum if you are looking for parts. This forum would be appropriate to ask about parts interchangeability though so you might want to rephrase your question.

    In general, body parts such as tanks, and seats do not interchange between the E's and L's. Of course, anything can be made to work if you don't mind doing some fabrication work.

    BTW: what is a "Govenor assembly(bolt, washer etc.)"?

    Good luck.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      I seen that after I posted....WHOOPS

      I'll get this system figured out soon...

      On the parts fiche Suzuki calls the piece I am missing the govenor assembly...

      Comment


        #4
        Originally posted by Newbee View Post
        I need a fuel tank. Handle bars, but not sure I want the "L" kind? Left and right controls,gauges, rear master cylinder with brake lines. Brake switch. Govenor assembly(bolt, washer etc.)Air box complete. Everything required to mount front headlight. Signal generator cover. Do I have to use a "L" seat or will an "E" seat fit?

        I have a set of 1100E front forks...what do you think about putting these on? Basically I have a complete 1980 1000GL and I want to set this one up a little different...


        I'm tracking this stuff On EBAY but thought I would put a feeler out there and see if anyone has the stuff?
        I have a tank for your 80 1000GL check the parts for sale threads look for tanks, seat, fairing thread. Oh, and some handlebars too. Heck I got all that stuff.
        Last edited by Guest; 09-12-2008, 06:47 PM. Reason: addition

        Comment


          #5
          can i get a pic???

          How much for the tank? Is it for a 1000L or a 1100L?

          Comment

          Working...
          X