Announcement

Collapse
No announcement yet.

oil window?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Pearson,

    You got a 82 Katana? Would love to see some pics....

    Comment


      #17
      Seriously drain it into a clean container and you can get the gasket at a Suzuki dealer.

      Comment


        #18
        i had the same problem with my gs1000. the sight glass was badly tarnished and i couldnt see the level. a good friend of mine gave me a good tip...........
        i replaced the sight glass with one from a kawasaki gpz305. it is a perfect fit and has no metal back plate. makes reading the oil level much easier and if it does get murky with age,is much easier to clean.
        a lot cheaper than a genuine suzuki item too
        1978 GS1085.

        Just remember, an opinion without 3.14 is just an onion!

        Comment


          #19
          here's a picture for reference, as you can see, there is definately something in there that shouldn't be, I will probably have a chance to clean it out this weekend sometime. I want to track down a new gasket first (local powersport store has to order one in) has anyone used the "liquid gaskets"?

          Comment


            #20
            wow, shadow, you weren't kidding. There is definitely some unwanted schmutz in there.

            I have to say your window looks a hell of a lot cleaner than mine, unless you took that picture with an empty case. I can't even see that clearly into mine. Of course, as someone suggested, it could be that there's too much oil rather than it being a cloudy window, and I also (unfortunately) am lacking in the sidestand dept., so I'd have to have someone stand the bike for me or something while I check.

            But when the bike is on the side stand and when it's upright the window's clarity does not change. Guess I'll just have to find out when I do my first oil change.

            Comment


              #21
              Originally posted by shadowfist View Post
              has anyone used the "liquid gaskets"?
              I made mine out of sheet gasket material. Don't use gaskets from a tube. There's little, to no, oil pressure on that cover, it just sloshes around. Please use a real gasket though, the other just causes problems when a little chunk comes off and makes it way to your oil pump.
              Larry D
              1980 GS450S
              1981 GS450S
              2003 Heritage Softtail

              Comment


                #22
                So, Shadowfist,

                Have you had a chance to get in there and look at it?

                Curious to know what it was.....

                Comment


                  #23
                  Originally posted by Smokinapankake View Post
                  So, Shadowfist,

                  Have you had a chance to get in there and look at it?

                  Curious to know what it was.....
                  well, i havent yet because my bike is stranded at a friends house
                  you can read all about my troubles over in that thread here

                  EDIT: well i got my bike back from my friends house and got it running again :-D
                  so i havent cracked over the side of the engine yet because i was busy doing the happy dance :-D
                  but i did snap another pic of the obstruction :
                  Last edited by Guest; 10-30-2008, 11:10 PM.

                  Comment

                  Working...
                  X