I would like to try and keep riding the bike into December. Should I switch to a lighter weight oil like a 10w40 now that the cold temps are here?
Announcement
Collapse
No announcement yet.
Which Oil for Cold Temperatures??
Collapse
X
-
Which Oil for Cold Temperatures??
I've been running rotella 15w40 in the GS for the last couple months. I've noticed that in the morning when the temps are in the low-mid 30's that the bike wants to creep forward in first gear when the clutch lever is pulled in. This goes away after the first couple of minutes as the bike warms up. During warm weather this does not happen.
I would like to try and keep riding the bike into December. Should I switch to a lighter weight oil like a 10w40 now that the cold temps are here?Tags: None
-
catbed
-
lurch12_2000
Originally posted by almarconi View PostI've been running rotella 15w40 in the GS for the last couple months. I've noticed that in the morning when the temps are in the low-mid 30's that the bike wants to creep forward in first gear when the clutch lever is pulled in. This goes away after the first couple of minutes as the bike warms up. During warm weather this does not happen.
I would like to try and keep riding the bike into December. Should I switch to a lighter weight oil like a 10w40 now that the cold temps are here?
Comment
-
almarconi
I thought the 5w-30 oil was only available in the "energy conserving" form which I was told would cause clutch slippage.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
The viscosity number with the “W” stands for the Winter test – basically, cold weather flowability. Lower is better for cold weather usage – 5W is a good way to go if you are running your bike with the temperature near the freezing point. The second number in the viscosity rating stands for the normal running viscosity when the oil is warm.
Suzuki calls for 10W-40. If the weather is warm, 15W-40 is reasonable and if the weather is cold, 5W-40 might be advised. Using 5W-30 or 10W-30 is not recommended unless you are taking short trips in cold weather; once the engine warms up, the 30 weight oil is not thick enough to properly protect your engine.
Motorcycle specific oil is fine as is diesel engine oil (this is what I use since it’s far cheaper); these oils typically have more high pressure additives than auto oil and are more shear stable due to their base oil chemistry. I certainly wouldn’t call motorcycle specific oils superior though; if you go to the Bob is the Oil Guy forum and read though the various threads there, you will learn that many of the expensive motorcycle specific oils (like Repsol) are nothing special from a chemical standpoint while being very expensive.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
almarconi
-
catbed
there are some that are synthetic 5w-40. castrol GTX is one of them because i just bought some for my car, but it may have anti-wear additives that arent good for your clutch because it is not motorcycle specific. i have heard that you can get full synthetic Rotella T 5w-40 at walmart. its for diesel engines like Nessissm said.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
I don’t think clutch slippage from using synthetic auto oil is a huge issue unless your clutch is marginal to begin with. Same goes with synthetic oil creating oil leaks; it won’t unless sludge is plugging leaks on your engine to begin with, in which case the synthetic oil may eliminate the sludge thus leading to leakage.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
almarconi
-
Originally posted by catbed View Post... i have heard that you can get full synthetic Rotella T 5w-40 at walmart. its for diesel engines like Nessissm said.Originally posted by almarconi View PostThe next time I go to Walmart I'll get a jug of the 5w-40 Rotella and give it a try.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment