Announcement

Collapse
No announcement yet.

Gear indicator problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gear indicator problems

    I just picked up an 82 gs1100E
    first E we have, we have 3 Ls this is our first E

    looks great, runs good, havent driven it yet, got it last night, been raining all day todya, pressure washed her clean

    i noticed the indicator last night wasnt giving the right gear number, nor was it back lighting, i was just getting a black number which you cannot see at night

    i searched and found that the indicator sender is down by the chain
    so i took the sproket cover off, and unscrewed the 2 screws holding the sender on, saw the few copper contacts, i wiped everything clean, oil was dripping out when i had the sendor out, is this right?

    also i noticed the sender had a gouge threw sever of the contacts


    i also searched and read that the plugs are under the tank, so i disconected the tank and moved it outta the way
    i undid the 2 sets of connectors, checked how they looked, very clean no broken pins or crud on the contacts

    so what should my next step be?
    how would i trouble shoot what it is?
    and how is the single display backlit?

    thank you

    #2
    Chances are, the readout in the instrument cluster is the issue. You can try changing the sender to see if it changes but my money is on the readout in the cluster. Ray.

    Comment


      #3
      the indicator does change numbers if i shift, but its wrong numbers

      is there anyway to test out what it is vs throwing parts into it

      Comment


        #4
        Listen to Ray on this one. You have the digital one, right?
        1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
        1985 GS1150ES stock with 85 Red E bodywork.

        Comment


          #5
          it has 1 display which will change numbers if i shift

          Comment


            #6
            took a ground and touched each contact

            2 was shown on most of them, i got a 6 and 7 to show aswell

            no 1 or 3 or 4 or 5

            so where can i get a display for at the gauges?

            Comment


              #7
              Originally posted by GS1100ez View Post
              took a ground and touched each contact

              2 was shown on most of them, i got a 6 and 7 to show aswell

              no 1 or 3 or 4 or 5

              so where can i get a display for at the gauges?
              Look on EBAY as they are not available new from Suzuki any longer. Or put a wanted in the FOR SALE section on the forum.

              Comment


                #8
                ebay was my first place i looked
                alot of sensors but couldnt find any of the indicators themselves

                Comment


                  #9
                  Originally posted by GS1100ez View Post
                  ebay was my first place i looked
                  alot of sensors but couldnt find any of the indicators themselves
                  You might have to wait a while for something to come up. Everything comes to him who waits. It would also be good to check out the earlier models that used a digital indicator to see if any are the same as yours. Will give you more options when looking for one. I know the early 70s two strokes had them, GT750 etc.

                  Comment


                    #10
                    well i picked up an entire gauge set on ebay, 37bucks plus shipping

                    got it, totla garbage, he said good working condition
                    got it to find a big gauge taken out of the housing

                    opened it up to find the gauges were broken and had been glued back together


                    anyways, i hooked them up to check the indicator (the real reason i bought it)
                    and it shifts threw the numbers correctly, which is great

                    but it still does not light up, are these things supposed to be backlit?
                    or is it just black numbers on grey background?

                    Comment


                      #11
                      so does it light up all the time?

                      Comment

                      Working...
                      X