O-ring kit for VM29's?

[Nessism]

Anyone know if Robert Barr's VM O-ring kit (cycleorings.com) will fit on some VM29's?

Thanks.

Ed

[bwringer]

Why wouldn't it?

[Nessism]

The 29's are the "smoothbore" jobbies, which are different from the more common OE VM's - no fuel screw for example.

[first timer]

i don't think so, i ended up buying a harbor freight metric o-ring kit and a bunch of random sized ring from mc-mastercarr. Give sudco a call and see if you can order 1 of each ring you need then measure them and get what you need from mastercarr.

or you can try to get a mikunki o-ring kit from parts unlimted via a dealer (thats what dealers use to rebuild most carbs instead of buying kits.) they might have what you need.

I best bet would be sudco.

on the plus side i don't rember that many o-rings and i think the harbo freight kit covered most of what i needed.

[Old Colt]

Correct, no fuel screw but everything else interchanges with the 26& 28 carbs. Most of the part numbers for starter circuit and fuel banjos are all the same.